Sichuan Vacorda Instruments Manufacturing Co., Ltd
23 Years Focused on Level Measurement in Extreme Process Conditions
Add to Cart
Side Mounted High Pressure Magnetic Liquid Level Gauge For Boiler Liquid
Installation and maintenance
| 1. | The level gauge must be installed vertically to ensure that the float assembly can move up and down in the main tube. |
| 2. | There is no permissible magnet near the main body of the liquid level gauge, otherwise it will directly affect the work of the liquid level gauge. |
| 3. | After the liquid level gauge is installed, it needs to be calibrated with magnetic steel to guide the turning column once so that the display below the zero position is red and the display above the zero position is white. |
| 4. | When the liquid level gauge is put into operation, the valve of the lower liquid introduction pipe should be opened first to allow the liquid medium to enter the main pipe smoothly, so as to avoid the rapid rise of the liquid medium with the floating ball assembly, which may cause the failure of the column turning and disorderly turning. If this phenomenon occurs, the magnetic steel can be used to recalibrate after the liquid level is stable. |
| 5. | In order not to damage the float assembly during transportation, the float assembly is taken out of the main tube of the level gauge before leaving the factory. After the level gauge is installed, the bottom sewage flange is opened and the float assembly is reinstalled. Into the main body tube, pay attention to the heavy end of the float assembly upwards, can not be flipped. If the float assembly has been installed in the main tube at the factory, in order to ensure that it has been transported In the process, the floating ball assembly is not damaged. We use a soft card to fix the floating ball assembly in the main tube. As long as the soft card is pulled out during installation. |
| 6. | According to the condition of the medium, the blowdown flange can be opened regularly to clean the main pipe sediment. |